Bushing conductor studs, pressure and vacuum tight

37-9119-A019/70E.


Ambient temperature

-70 °C up to +150 °C


Description

Industrial processes often take place within closed containers, under increased pressure or even vacuum conditions. It is therefore of utmost importance that no media leakages or pressure/vacuum drops occur when electrical power or signals are led through the container wall. Our BARTEC pressure and vacuum sealed stud-type bushings provide a simple and cost-effective solution to this problem. The stud-type bushings essentially consist of a threaded metal sleeve and the stud forming one block by means of a creepage-proof insulation material. The electrical connection can be made by the user himself with conventional connection systems. The seals can withstand pressures from 10 mbar abs. to 63 bar depending on the type used for the installation. Depending on their field of application, BARTEC pressure and vacuum sealed stud-type bushings can be used at temperatures of -70 °C to +150 °C. Our BARTEC stud-type bushings can also be used under conditions that differ from the basic technical data listed below.


Technical data *

Dimensions see data sheet
Pressure Nominal pressure: up to 63 bar (at RT = +25 °C)
Test pressure: 80 bar at RT
Installation Stud thread M3 to M30
Voltage Nominal voltage: up to 1000 V
Current 100 A, 250 A, 315 A (see data sheet)

*Refer to the documentation for more detailed information


Documentation

Data Sheet - Bushing conductor studs, pressure and vacuum tight

Customer requirements - Cable entries/line bushings

Меню
小草青青在线观看免费